duo assembly
Zenbooth Duo Build Instructions
Duo 6.2 and Rev 7
INTRODUCTION
Your Zenbooth has arrived!
We’re thrilled to welcome you into the peace and comfort of your new Zenbooth! Thank you for choosing a sustainable, people-friendly privacy solution for your space. Your decision supports not only your team’s productivity but also a healthier, happier community.
Your Zenbooth Duo, carefully crafted in Berkeley, California, brings a touch of nature into your office. Made from eco-friendly materials like FSC-certified wood, low VOC finishes, and recycled insulation, your booth is designed to enhance focus and privacy while minimizing environmental impact. We’re proud to partner with local suppliers and reduce carbon emissions through sustainable sourcing and lean manufacturing.
We can’t wait for you to experience the difference it makes in your workspace!
If you have any questions or run into any issues while building your Zenbooth, don’t hesitate to reach out — we’re a small team of real people here to help you.
Email us: support@zenbooth.net
Call us: (510) 646-8368
And remember, your Zenbooth comes with a 3-year warranty. Please feel free to contact us at any stage of your booth’s lifecycle — we’re here to ensure your experience is smooth and enjoyable from start to finish!
PRODUCT SPECS
Specifications - Free-standing, modular privacy booth.
Measurements
Exterior Size: 85" x 84" x 46.5" (HxWxD)
Interior Size: 83.5" x 74.75" x 37.5" (HxWxD)
Weight
900 lbs
Skylight
1/2" shatterproof Plexiglass
Sound control
4" thick walls containing recycled cotton/denim insulation
Walls & Color
US made engineered wood panels with laminated maple interior and 2 exterior color options:
Door
36" wide self-closing door
18.8" door handle
Desk
Adjustable Desk Height: 29" to 55"
Desk Size: 34"W x 21"D
Maximum Load: 100 LB
Power & Data Unit
UL-Listed Power Unit
Easy plug-in electrical setup with 10ft standard three-prong power cord
Interior occupancy sensor controlling ventilation system & lighting
Two (2) 15A 110v electrical outlets
One (1) USB-A 10W
One (1) USB-C 12W
Pass-through option for additional wiring
Product Assembly Time
30-60 Minutes
PARTS OVERVIEW
TOOLS INCLUDED
- Point Size #2 Phillips Bit
- Point Size #3 Phillips Bit
- Point Size #2 Square Bit
- Hex Key 3mm (Door Handle assembly)
- Hex Key 4mm (Spring Hinge)
- Shims 4 x
TOOLS NEEDED
- Ladder
HARDWARE
- 27 count 2” Square Drive Screws (Walls)
- 25 count 1/2” Phillips Drive Screws (Door Hinges)
- 61 count 1 1/2” Phillips Drive Screws (Door Frame, Door Header)
- 5 count 3/4” Phillips Drive Screws (Desktop to Lift)
- 7 count 1” Phillips Drive Screws (Desk Column to Wall)
- 9 count 1/2” Square Drive Screws (Skylight to Top)
- 2 count Door handle Screw - Internal/ External
- 1 count Spring Hinge Pin
- Magnetic Latch 1 count
- Hinge Plate (Top) 2 count
- Hinge Plate (Bottom) 2 count
- Spring Hinge (Middle) 1 count
WALL PANELS
- D12 - Exterior Rear Left Wall
- D11 - Exterior Rear Right Wall
- D2 - Interior Left Wall
- D4 - Interior Right Wall
- D9 & D10 - Exterior Side Wall
ASSEMBLY NOTES
Before assembly!
Before beginning assembly, we recommend consulting a professional insured Zenbooth installer or general contractor. Warranty may be void if components are improperly installed.
Contact us at support@zenbooth.net for any additional information or customer support.
After unpacking, inspect all parts for damage. If any parts are damaged as a result of shipping, report them to Zenbooth Support with a photo before assembling so we can send you a replacement part.
After assembly, use a wet rag to wipe down any dust created in the installation process. Do not use ammonia based cleaners on the skylight. Use a commercial plastic cleaner, or mild soap and water for best results.
Place the booth a minimum of 4 inches away from wall to ensure adequate airflow. If the fan stops working, stop using the booth and contact Zenbooth for a replacement.
Additionally allow a minimum of 36 inches of clearance at the front of the booth for door access.
Safely execute the install with two people!
WARNING: Risk of Electric Shock, Fire, and Injury. Please read and follow all assembly instructions to safely assemble your booth.
Contact your building and fire marshal before installation to discuss the specific fire suppression requirements for your facility. Minimum distance from a wall for optimal ventilation.
ASSEMBLY STEPS
- Place Base on level ground.
- Insert the Interior Rear Left Wall (D1) into the Left side of the Floor.
Left Wall Assembly
- Slide the Interior Left Wall (D2) into the joining grooves of the Base and Left Wall.
- Ensure the top of all Walls are flush throughout your build once the Walls are set.
- Using 2" square drive screws, fasten the Interior Left Wall to the Interior Rear Left Wall.
Rear Wall Stud
Insert the Wall Stud into the Interior Rear Left Wall.
Insert the Interior Rear Right Wall (D3) to the Base and join to the Panel Divider.
Insert the Interior Right Wall (D4) into the Base and Interior Rear Right Wall.
Fasten Left Exterior Rear Wall
- Insert the Exterior Rear Left Wall (D12) into the Base, and join to the Left Exterior.
- Using 2" square drive screws, fasten the Exterior Rear Left Wall.
Install Electric Desk Lift
- Using the Point Size 2 Hex Driver bit, loosen the 1/2" Hex Panhead screws which are preinstalled to the Desktop bracket. Please make sure the pilot holes are properly aligned.
Install Desk Brackets
- Using the Point Size 2 Phillips Driver bit and six 3/4" Black Panhead Screws, align the brackets with the pilots and mount them to the Wall.
- Plug the yellow cord from the front of the column into the cable protruding from the silver box. Next, plug the Power Cord into one of the available outlets located on the back of the booth. Check to ensure that the Desk moves the full range both up and down.
INITIALIZATION / RESET PROCEDURE
- Press and hold the DOWN button on the Handset until the desk reaches its lowest height. Release the DOWN button.
- Press and hold the DOWN button until the desk lowers a little bit more and stops. Release the DOWN button.
Your desk is now ready to use. Press and hold the DOWN button for about 10 seconds. Release the DOWN button.
PRODUCT QUALITY, DAMAGE & WARRANTY
Zenbooth strives to provide a high-quality product. If your product arrives damaged, has missing parts, or has other workmanship defects, Zenbooth will ensure necessary services to provide you support and solutions to maintain our product quality standards.