quad assembly
Zenbooth Quad Build Instructions
TABLE OF CONTENTS
- Introduction
- Product Specs
- Tools - Included
- Tools - Needed
- Hardware List
- Small Parts
- Wall Panels
- Large Parts
- Assembly Instructions
- Product Quality, Damage & Warranty
INTRODUCTION
Your Zenbooth has arrived!
We’re thrilled to welcome you into the peace and comfort of your new Zenbooth! Thank you for choosing a sustainable, people-friendly privacy solution for your space. Your decision supports not only your team’s productivity but also a healthier, happier community.
Your Zenbooth Quad, carefully crafted in Berkeley, California, brings a touch of nature into your office. Made from eco-friendly materials like FSC-certified wood, low VOC finishes, and recycled insulation, your booth is designed to enhance focus and privacy while minimizing environmental impact. We’re proud to partner with local suppliers and reduce carbon emissions through sustainable sourcing and lean manufacturing.
We can’t wait for you to experience the difference it makes in your workspace!
We’re Here to Help Every Step of the Way!
If you have any questions or run into any issues while building your Zenbooth, don’t hesitate to reach out — we’re a small team of real people here to help you.
Email us: support@zenbooth.net
Call us: (510) 646-8368
And remember, your Zenbooth comes with a 3-year warranty. Please feel free to contact us at any stage of your booth’s lifecycle — we’re here to ensure your experience is smooth and enjoyable from start to finish!
PRODUCT SPECS
Specifications - Free-standing, modular privacy booth.
Measurements
- Exterior Size: 86” x 93” x 93” (HxWxD)
- Interior Size: 84” x 85” x 85” (HxWxD)
Door
- Width: 36” wide self-closing door
- Handle: 18.8” door handle
Weight
- 900 lbs
Skylight
- 1/2” shatterproof Plexiglass
Sound control
- 4” thick walls containing acoustic insulation
Power & Data Unit
- 1x USB-C
- 1x USB-A
- 2 x 15A 110v electrical outlets
- Grommet for data and telephone cables
Walls & Color
- US made engineered wood panels with laminated maple interior and 2 exterior color options:
TOOLS INCLUDED
- Point Size #2 Phillips Bit
- Point Size #3 Phillips Bit
- Point Size #2 Square Bit
- Hex Key 3mm (Door Handle assembly)
- Hex Key 4mm (Spring Hinge)
- Shims 4 x
TOOLS NEEDED
- 7/16" Wrench
- Drill
- Ladder
- Drill Extension 4"+
- Rubber Mallet (Recommended)
- 100% POLYURETHAN GLOVES
HARDWARE
- 37x 2” Square Drive Screws (Walls)
- 61x 1 1/2” Phillips Drive Screws (Door Frame, Door Header)
- 25x 1/2” Phillips Drive Screws (Door Hinges)
- 2x Top Connectors
- 9x Dowels (Base Assembly)
- 1x Spring Hinge Pin
- 5x 1” Phillips Drive Screws (Base Assembly)
- 17x 3/4” Square Drive Screws (Skylight to Top)
- 3x 3/4” Phillips Drive Screws (Magnetic Latch)
Note: All fastener counts include one spare.
ASSEMBLY INSTRUCTIONS
Before assembly!
Before beginning assembly, we recommend consulting a professional insured Zenbooth installer or general contractor. Warranty may be void if components are improperly installed.
Contact us at support@zenbooth.net for any additional information or customer support.
After unpacking, inspect all parts for damage. If any parts are damaged as a result of shipping, report them to Zenbooth Support with a photo before assembling so we can send you a replacement part.
After assembly, use a wet rag to wipe down any dust created in the installation process. Do not use ammonia-based cleaners on the skylight. Use a commercial plastic cleaner, or mild soap and water for best results.
Place the booth a minimum of 4 inches away from the wall to ensure adequate airflow. If the fan stops working, stop using the booth and contact Zenbooth for a replacement. Additionally, allow a minimum of 36 inches of clearance at the front of the booth for door access.
Safely execute the install with two people!
WARNING: Risk of Electric Shock, Fire, and Injury. Please read and follow all assembly instructions to safely assemble your booth.
Contact your building and fire marshal before installation to discuss the specific fire suppression requirements for your facility.
Minimum distance from a wall for optimal ventilation.
ASSEMBLY STEPS
Step 01:
Place Base on level ground. Attach base pieces together with dowels and secure with four 1” Phillips screws.
Step 02:
Insert the Interior Rear Left Wall (Q1) into the front groove on the rear left side of the Floor.
Note: One person needs to support this panel during this step to keep it from falling over.
Step 03:
Using 2” square drive screws, fasten the Interior Left Rear Wall (Q2) to the Interior Rear Left Wall (Q1).
Step 04:
Insert the Interior Rear Right Wall (Q3) to the Base and join to the Panel Divider.
Step 05:
Insert the Interior Right Rear Wall (Q4) into the joining grooves of the Base and Interior Rear Right Wall (Q3).
Step 06:
Insert the Interior Left Front Wall (Q5) into the Base and join to the Panel Divider. The wall will need to be slid in at a slight angle.
Step 07:
Press a Panel Divider onto the left wall already installed.
Step 08:
Insert the Exterior Left Facade (Q6) Wall into the Base and over the existing wall, fitting the Interior Left Front Wall (Q5) into the groove.
Step 09:
Using 2” square drive screws, fasten the Exterior Left Facade (Q6) Wall to the Interior Left Front Wall (Q5).
Step 10:
Insert the Exterior Right Facade (Q8) Wall into the Base and over the existing wall, fitting the Interior Right Front Wall (Q7) into the groove.
Step 11:
Using 2” square drive screws, fasten the Exterior Right Facade (Q8) Wall to the Interior Right Front Wall (Q7).
Step 12:
Slide the Door Frame Header into the slots on the Interior Front Walls and secure with 1 1/2” square drive screws.
Step 13:
Hang the door on the two mounted Hinges.
Step 14:
Secure the Door Frame on the Interior and Exterior of the booth using 1 1/2” Square Drive Screws.
Step 15:
Use 2” Square Drive to attach the booth to the Base.
Step 16:
Install the Top by guiding it into place, ensuring all connections are tightened.
Step 17:
Plug the power cord into your booth.
Congratulations! Your booth is ready to use.
PRODUCT QUALITY, DAMAGE & WARRANTY
Product Quality or Damages
Zenbooth strives to provide a high-quality product. If your product arrives damaged, has missing parts, or has other workmanship defects, Zenbooth will ensure necessary services to support you and maintain our product quality standards.
In product quality or damages cases, the customer is responsible for opening the packaging, inspecting the product, and reporting damages within 3 days of delivery. Such claims must include photographs and a detailed description, and be emailed to support@zenbooth.net. Failure to make a claim within the 3-day period constitutes acceptance of the merchandise.
In cases of missing parts or workmanship defects, Zenbooth will absorb the costs incurred in replacing and shipping as necessary.
Warranty
Zenbooth products are sold with a limited warranty against defects in materials and workmanship for a period of three years from the delivery date. Zenbooth reserves the right to repair or replace defective merchandise at its sole discretion. This limited warranty does not extend to other materials supplied by the purchaser or damage caused by shipping, accident, abuse, misuse, cleaning, customer modifications, or normal wear and tear. All other warranties expressed or implied are excluded.
For full details on return policies, terms, and conditions go to: zenbooth.net/pages/terms-and-conditions.